Department of Materials Science and Engineering University of Ioannina School of Engineering
 
 
foto-header
You are here: Home > Department > Personnel > Laboratory Teaching Staff > M. Georgatis
PHOTO Manolis Georgatis
Laboratory Teaching Staff

EMAIL mgeorgat@uoi.gr
PHONE (+30)-265100-7398 (Office)
PHONE (+30)-265100-7349 (Lab)
Academic Titles
Educational & Professional Experience
Teaching Activities in the Department
Research Interests
Representative Publications

Academic Titles
  • Diploma of Metallurgy and Mining Engineering, National Technical University ofAthens(1982)
Educational & Professional Experience
  • Quality Control Department Director at “Epirus Foundries S.A.” (1984-1986)
  • Production Manager at “Epirus Foundries S.A.” (1986 –2002)
  • R&D Director at “Epirus Foundries S.A. (1997-2002)
  • Assistant Professor with contract, (according to the Greek law 407/1980), in the Department of Materials Science and Engineering, University of Ioannina, Greece (2002-2004)
  • Laboratory Teaching Staff in the Department of Materials Science and Engineering, University of Ioannina, Greece (2004-today)
Teaching Activities in the Department
  • Laboratory of Materials IV (Metallurgy)
  • Aluminum Science and Technology
Research Interests
  • Metallic materials and alloys
  • Casting technologies
  • Strength optimization of castings
  • Aluminum Science and Technology
  • High Entropy Alloys
Representative Publications
  • Microstructure and wear behavior of a refractory high entropy alloy A Poulia, E Georgatis, A Lekatou, AE Karantzalis. International Journal of RefractoryMetals and Hard Materials 57, 50-63
  • Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties. E Georgatis, A Lekatou, AE Karantzalis, H Petropoulos, S Katsamakis, A Poulia. Journal of materialsengineering and performance 22 (3), 729-741
  • Microstructural observations in a cast Al-Si-Cu/TiC composite. AE Karantzalis, A Lekatou, E Georgatis, V Poulas, H Mavros. Journal of Materials Engineering and Performance 19 (4), 585-590
  • Solidification observations of dendritic cast Al alloys reinforced with TiC particles AE Karantzalis, A Lekatou, E Georgatis, T Tsiligiannis, Η Mavros. Journal of materialsengineering and performance 19 (9), 1268-1275
  • Microstructural features and dry-Sliding wear response of MoTaNbZrTi high entropy alloy. C Mathiou, A Poulia, E Georgatis, AE Karantzalis. Materials Chemistry and Physics 210, 126-135
  • Solidification observations of vacuum arc melting processed Fe–Al–TiC composites: TiC precipitation mechanisms. AE Karantzalis, A Lekatou, E Georgatis, Z Arni, V Dracopoulos. Materials Characterization 62 (12), 1196-1204
  • Dry‐Sliding Wear Response of MoTaWNbV High Entropy Alloy. A Poulia, E Georgatis, A Lekatou, A Karantzalis. AdvancedEngineering Materials 19 (2), 1600535
  • Solidification behaviour of ceramic particle reinforced Al-alloy matrices. AE Karantzalis, A Lekatou, E Georgatis, H Mavros. Journal of materialsscience 45 (8), 2165-2173
  • Evaluation of the microstructural aspects, mechanical properties and dry sliding wear response of MoTaNbVTi refractory high entropy alloy. A Poulia, E Georgatis, A Karantzalis. Metals and Materials International 25 (6), 1529-1540
  • Phase formation criteria assessment on the microstructure of a new refractory high entropy alloy. AE Karantzalis, A Poulia, E Georgatis, D Petroglou. ScriptaMaterialia 131, 51-54
  • Phase segregation discussion in a Hf25Zr30Ti20Nb15V10 high entropy alloy: The effect of the high melting point element. A Poulia, E Georgatis, C Mathiou, AE Karantzalis. Materials Chemistry and Physics 210, 251-258
  • Analysis of Microstructure and Sliding Wear Behavior of Co1.5CrFeNi1.5Ti0.5 High-Entropy Alloy. K Lentzaris, A Poulia, E Georgatis, AG Lekatou, AE Karantzalis Journal of Materials Engineering and Performance 27 (10), 5177-5186
  • Microstructural verification of the theoretically predicted morphologies of the NiAl–Cr pseudo-binary alloy systems and NiAl–Cr eutectic structure modification by Mo addition. C Mathiou, K Giorspyros, E Georgatis, AE Karantzalis SN AppliedSciences 1 (10), 1292
  • Vacuum arc melting processed Fe-Al matrix based intermetallic composites, reinforced with VC phases: assessment of microstructure, sliding wear and aqueous corrosion response. E Karapanou, A Lekatou, A Sfikas, E Georgatis, K Lentzaris, A Karantzalis MaterSciEngAdvRes. https://doi. org/10.24218/msear
  • New MoWHfZrTi Refractory High Entropy Alloy System: A Microstructural Verification of Phase Formation Criteria Approach. AE Karantzalis, A Poulia, E Georgatis, D Petroglou, C Mathiou. Research and Reports on Metals 1, 1
  • AlNiCrFeMn equiatomic high entropy alloy: a further insight in its microstructural evolution, mechanical and surface degradation response. E Ananiadis, K Lentzaris, E Georgatis, C Mathiou, A Poulia, AE Karantzalis. Metals and Materials International 26 (6), 793-811
  • Adjustment of Hardness of (CrFeMn)x(NiyAl)1-x, (y = 1,3 and x = 0.6,0.72,0.80) High Entropy Alloys by Deliberate Control of Intermetallic Phase Formation .C.Mathiou, D Ganara, E Georgatis, A Poulia, K Lentzaris, AE Karantzalis. Metals and Materials International
  • A further examination of MoTaxNbVTi (x = 0.25, 0.50, 0.75 and 1.00 at.%) high-entropy alloy system: microstructure, mechanical behavior and surface degradation D Petroglou, A Poulia, C Mathiou, E Georgatis, AE Karantzalis. AppliedPhysics A 126, 1-13
  • A first approach on the assessment of the creep behavior of MoTaNbVxTi high entropy alloys by indentation testing. AE Karantzalis, D Sioulas, A Poulia, C Mathiou, E Georgatis. SN AppliedSciences 2, 1-10
  • NiAl-Cr-Mo Medium Entropy Alloys: Microstructural Verification, Solidification Considerations, and Sliding Wear Response. C Mathiou, K Giorspyros, E Georgatis, A Poulia, AE Karantzalis. Materials 13 (16), 3445
Page-end